作業はできますが、SCSIケーブルのつなぎかえ or BIOS再設定必要。
SCSIディスクがこんな状態(40MB/s)のため。

da0: <SEAGATE ST336753LW 0006> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)

da1: <SEAGATE ST336753LW 0006> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)

なお、今回のタマはSCSIカードがAdaptecの模様(カードそのものはU320サポート)

ahd0: <Adaptec 29320 Ultra320 SCSI adapter> port 0x3000-0x30ff,0x3400-0x34ff mem 0xfe200000-0xfe201fff irq 29 at device 1.0 on pci3
ahd1: <Adaptec 29320 Ultra320 SCSI adapter> port 0x3800-0x38ff,0x3c00-0x3cff mem 0xfe202000-0xfe203fff irq 30 at device 1.1 on pci3